لایسنس LiveAction LiveNX
فهرست مطالب
معرفی لایسنس LiveNX
شرکت LiveAction به عنوان پارتنر شرکت سیسکو شناخته می شود و نرم افزار LiveNX را میتوان بهترین و کاملترین راهکار موجود برای پایش و مدیریت شبکه های WAN و LAN دانست. LiveNX یک نرم افزار هوشمند و واکنشگراست که قابلیت پایش و مدیریت دقیق زیرساخت شبکه و ترافیک عبوری را با جزئیات کامل و فارق از نوع و برند تجهیزات موجود ارائه می دهد. این نرم افزار برای استفاده در IXP, ICP, ISP و شرکتهای بزرگ اینترنتی (Carrier) طراحی شده است و به همین دلیل از قیمت بسیار زیادی برخوردار است.
LiveNX از یک شیوه جدید برای پایش و مدیریت شبکه های بزرگ استفاده میکند به این ترتیب که اطلاعات ریز و جزئی تمامی تجهیزات موجود را با توپولوژی شبکه تجمیع کرده و بدین ترتیب امکان پایش و مدیریت تمامی مسیرهای ترافیک عبوری با جزئیات کامل به صورت کلی و یا روی هر مسیر یا هر تجهیز خاص را ارائه می دهد که ثمره آن فهم دقیق وضعیت موجود، مدیریت و عیب یابی بسیار ساده تر خواهد بود.
LiveNX برای پایش و مدیریت شبکه از روشهای مختلفی از جمله SNMP V2, SNMP V3, SSH, Telnet استفاده میکند و به این ترتیب میتوان تمامی تنظیمات مورد نظر را مستقیما از طریق این نرم افزار روی یک تجهیز یا تعداد نامحدودی از تجهیزات بدون نیاز به اتصال به تک تک آنها و بصورت کاملا خودکار اعمال کرد.
LiveNx یک نرم افزار ماژولار می باشد که مشتری بر اساس نیاز خود قادر است ماژولهای مورد نیاز خود را سفارش دهد و یا در آینده به نرم افزار اضافه کند ، ماژولهای قابل سفارش برای این نرم افزار عبارتند از:
QOS Module
این ماژول امکان تنظیم و اعمال تمامی سیاستهای QOS را روی تجهیزات شبکه فراهم میکند ، این نرم افزار با استفاده از فهم و شناخت دقیق ترافیک عبوری از تمامی تجهیزات،قابلیت اعمال محدودیتها و اولویتهای خاص را برای ترافیکهای مختلف به صورت متمرکز و بسیار آسان را داراست ، از جمله این قابلیتها میتوان به موارد زیر اشاره کرد:
- Cisco Modular QoS Command Line Interface – MQC
- Class-Based Weighted Fair Queuing – CBWFQ
- Priority Queuing – PQ
- Class-Based QoS Management Information Base – CBQoS MIB
- Network Based Application Recognition – NBAR
- Next Generation Network-based Application Recognition – NBAR2
Flow Module
این ماژول امکان ارائه دقیق جزئیات مسیر عبور ترافیک، تجهیزات بین مسیر و وضعیت عملکرد هریک از این تجهیزات را برای هر ترافیک خاص فراهم میکند ، از جمله قابلیتهای این ماژول میتوان به موارد زیر اشاره کرد:
- Topology-based flow view across multiple devices
- Supports Cisco NetFlow v5, v9 and flexible NetFlow, IPFIX, Juniper J-Flow, sFlow from various vendors including Hewlett-Packard, Alcatel-Lucent, and 3Com
- NetFlow views inside the router for tracing flows from ingress to egress
- Full reporting capabilities
- Flow based dashboards
- Flow filtering based on DSCP, port, source address, or destination address
- Flow tables with the ability to sort and select flows
- Detailed information on individual flows
- Works in NetFlow MIB and Collector modes
- Ability to start and stop NetFlow data on a per-device basis
- Flow graph per interface based on destination or source address, DSCP, or port
- Ability to resolve IP addresses to hostname
- Faster troubleshooting of the network
- Ability to view flows across the network
- Ability to pinpoint entry and exit of flows
- Improved visibility and understanding of the flows
- Observe the effects of routing and PBR, such as route updates and asymmetric routing
Routing Module
این ماژول امکان پایش دقیق وضعیت عملکرد پروتکلهای مسیریابی روی تجهیزات شبکه و همچنین اعمال تغییرات دلخواه برای تعیین مسیرهای مشخص برای ترافیک خاصی را می دهد. از جمله امکانات این ماژول میتوان به موارد زیر اشاره کرد:
- System-level topology view of active routes
Displays by protocol, directionality, and destination
• Mouse-over displays individual route statistics
• Next-Hop Routing visualization
• OSPF and EIGRP neighbor adjacency - Device route-table views in graphical and tabular form
Shows destinations for interface
• Displays all entries or filtered entries only - Route display filtering by protocol
Filters by direct and static routes
• Filters EIGRP, OSPF, BGP, and RIP protocols
• Filters per user and periodic downloaded static routes
• Other filters: IS-IS, mobile, on demand, IGRP, EGP - Route display filtering by destination
Shows default route
• Shows routes to destination IP address
• Shows routes to destination network - Export function
Exports route and route table information for further analysis
• Exports forwarding tables to CSV file (by device) - Refresh real-time updates of routing layer—refreshes all routes or specified routes only
- Troubleshooting capabilities
Displays routing loops and asymmetric routes
• Alerts to routing instabilities
• Detects black holes
• Provides error summarization - Policy-based routing (PBR)
Configuration and editing of PBR and Set statements
• Editing of existing route map configurations
• Validates user entries to ensure PBR compliance
• Displays indicate where PBR is applied
• Exports route map statistics
• Displays static routes and PBR issues - Virtual Routing and Forwarding (VRF) visualization
Displays virtual routing and forwarding tables
• Exports VRF tables to CSV file
IP SLA Module
این ماژول با استفاده از اطلاعات و جزئیات دریافتی از تجهیزات شبکه قابلیت ارائه اطلاعات دقیق و لحظه ای از وضعیت Jitter, Latency, Packet Loss و موارد این چنینی روی تمامی خطوط فیزیکی و ارتباطات را فراهم میکند ،از جمله قابلیتهای این ماژول میتوان به موارد زیر اشاره کرد:
- Latency, loss, jitter, and MOS performance measurements
- System wide IPSLA hub and spoke and mesh configurations
- Test types: DHCP, DNS, FTP, HTTP, ICMP Echo, Jitter, Path Echo, Path Jitter, UDP Echo • Traffic type configuration
- Protocol type: more than 10 protocol types • DHCP: destination, source, circuit ID, remote ID, subnet mask
- Test frequency setting
- Jitter test parameters—VoIP codec simulation – G.711 ulaw, G.711 alaw, G.729a
Mode: active or passive
• Packet priority: normal or high
• Precision: in microseconds or milliseconds - IP SLA topology view – real time
Multiple colors for visualization
• Loss indicators
• Normal and above-threshold indicators
• Lists of running tests indicating source, type, status - Quick and full test options
- Set up responder at destination
- Start/Stop traffic tests
- Edit, save, or delete test configurations
- Export results to CSV file
- Historical reporting live update averages over timeline
Variable sampling rates: from 10 seconds to 5 minutes
• Latency: milliseconds over time, microseconds for jitter
• Loss: number of dropped packets
• VoIP MOS range: 1-5
LAN Module
این ماژول امکان پایش شبکه در لایه دو و همچنین ارائه نقشه و همبندی تجهیزات در این لایه را ارائه می دهد ف همچنین میتوان جزئیات کامل مربوط به نوع ارتباطات و میزان استفاده از پهنای باند را بدست اورد ، از جمله قابلیت های این ماژول:
- Network Visualization
Automatic device discovery
• VLAN trunk, port channel names
• VLAN associations within a device
• VLAN highlighting through a network
• Input/Output bandwidth of each VLAN and port interface - Real-Time Monitoring
Trunk and access bandwidth information through network polling
• Layer 2 QoS statistics including CoS, DSCP and IP precedence
• Dropped packets, interface warnings through network polling at the VLAN level
دیدگاهتان را بنویسید